HP Officejet Pro 8500 - Декларация соответствия

background image

Декларация соответствия

DECLARATION OF CONFORMITY

according to ISO/IEC 17050-1 and EN 17050-1

Supplier’s Name:

Hewlett-Packard Company

DoC#: SNPRC-0703-01-A

Supplier’s Address:

60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502

declares, that the product

Product Name:

HP Officejet Pro 8500 All-in-One Series

Regulatory Model Number:

1)

SNPRC-0703-01

Product Options:

C9101A / Automatic 2-Sided Printing Device

CB802A / 250 - sheet Paper Tray

conforms to the following Product Specifications and Regulations:

SAFETY:

IEC 60950-1:2001 / EN60950-1:2001 + A11: 2004
EN 60825-1 1994+A1:2002+A2: 2001

EMC:

CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3:1995 +A1: 2001
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B

TELECOM:

TBR 21: 1998

3)

FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005

Supplementary Information:

1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory

Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.

2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC

& the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.

3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,

clause 4.7.1.

4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

5. The product was tested in a typical configuration.

Singapore
April 2008

Wong Soo Min , Director Quality

Imaging & Printing Manufacturing Operations

Local contact for regulatory topics only:

EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany

www.hp.com/go/certificates

USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501

Приложение Г

322

Регуляторная информация

background image

DECLARATION OF CONFORMITY

according to ISO/IEC 17050-1 and EN 17050-1

Supplier’s Name:

Hewlett-Packard Company

DoC#: SNPRC-0703-02-A

Supplier’s Address:

60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502

declares, that the product

Product Name:

HP Officejet Pro 8500 All-in-One Series

Regulatory Model Number:

1)

SNPRC-0703-02

Product Options:

C9101A / Automatic 2-Sided Printing Device

CB802A / 250 - sheet Paper Tray

Radio Module Number:

RSVLD-0608

conforms to the following Product Specifications and Regulations:

SAFETY:

IEC 60950-1:2001 / EN60950-1:2001 + A11: 2004
EN 60825-1 1994+A1:2002+A2: 2001

EMC:

CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3:1995 +A1: 2001
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B

TELECOM:

EN 301 489-1 V1.6.1:2005 / EN 301 489-17 V1.2.1:2002
EN 300 328 V1.7.1 : 2006
TBR 21: 1998

3)

FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005

Supplementary Information:

1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory

Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.

2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC

& the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.

3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,

clause 4.7.1.

4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device

may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.

5. The product was tested in a typical configuration.

Singapore
April 2008

Wong Soo Min , Director Quality

Imaging & Printing Manufacturing Operations

Local contact for regulatory topics only:

EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany

www.hp.com/go/certificates

USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501

Декларация соответствия

323