Declaration of conformity
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name:
Hewlett-Packard Company
DoC#: SNPRC-0703-01-A
Supplier’s Address:
60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502
declares, that the product
Product Name:
HP Officejet Pro 8500 All-in-One Series
Regulatory Model Number:
1)
SNPRC-0703-01
Product Options:
C9101A / Automatic 2-Sided Printing Device
CB802A / 250 - sheet Paper Tray
conforms to the following Product Specifications and Regulations:
SAFETY:
IEC 60950-1:2001 / EN60950-1:2001 + A11: 2004
EN 60825-1 1994+A1:2002+A2: 2001
EMC:
CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3:1995 +A1: 2001
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
TELECOM:
TBR 21: 1998
3)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC
& the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.
3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,
clause 4.7.1.
4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
5. The product was tested in a typical configuration.
Singapore
April 2008
Wong Soo Min , Director Quality
Imaging & Printing Manufacturing Operations
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
Appendix D
278
Regulatory information
DECLARATION OF CONFORMITY
according to ISO/IEC 17050-1 and EN 17050-1
Supplier’s Name:
Hewlett-Packard Company
DoC#: SNPRC-0703-02-A
Supplier’s Address:
60, Alexandra Terrace, # 07-01 The Comtech, Singapore 118502
declares, that the product
Product Name:
HP Officejet Pro 8500 All-in-One Series
Regulatory Model Number:
1)
SNPRC-0703-02
Product Options:
C9101A / Automatic 2-Sided Printing Device
CB802A / 250 - sheet Paper Tray
Radio Module Number:
RSVLD-0608
conforms to the following Product Specifications and Regulations:
SAFETY:
IEC 60950-1:2001 / EN60950-1:2001 + A11: 2004
EN 60825-1 1994+A1:2002+A2: 2001
EMC:
CISPR 22:2005/ EN 55022: 2006 Class B
EN 55024:1998 +A1:2001 + A2:2003
EN 61000-3-2: 2000 + A2: 2005
EN 61000-3-3:1995 +A1: 2001
FCC CFR 47, Part 15 Class B / ICES-003, Issue 4 Class B
TELECOM:
EN 301 489-1 V1.6.1:2005 / EN 301 489-17 V1.2.1:2002
EN 300 328 V1.7.1 : 2006
TBR 21: 1998
3)
FCC Rules and Regulations 47CFR Part 68
TIA-968-A-1 +A-2 +A-3+A-4 Telecommunications – Telephone Terminal Equipment
CS-03, Part I, Issue 9, Feb 2005
Supplementary Information:
1. This product is assigned a Regulatory Model Number which stays with the regulatory aspects of the design. The Regulatory
Model Number is the main product identifier in the regulatory documentation and test reports, this number should not be
confused with the marketing name or the product numbers.
2. This product complies with the requirements of the Low Voltage Directive 2006/95/EC, the EMC Directive 2004/108/EC
& the R&TTE Directive 99/5/EC and carries the CE-marking accordingly. In addition, it complies with the WEEE Directive
2002/96/EC and RoHS Directive 2002/95/EC.
3. This product complies with TBR21:1998, except clause 4.7.1 (DC characteristic), which complies with ES 203 021-3,
clause 4.7.1.
4. This Device complies with Part 15 of the FCC Rules. Operation is subject to the following two Conditions: (1) This device
may not cause harmful interference, and (2) this device must accept any interference received, including interference that
may cause undesired operation.
5. The product was tested in a typical configuration.
Singapore
April 2008
Wong Soo Min , Director Quality
Imaging & Printing Manufacturing Operations
Local contact for regulatory topics only:
EMEA: Hewlett-Packard GmbH, HQ-TRE, Herrenberger Strasse 140, 71034 Boeblingen, Germany
www.hp.com/go/certificates
USA : Hewlett-Packard, 3000 Hanover St., Palo Alto 94304, U.S.A. 650-857-1501
Declaration of conformity
279