Send a fax in Error Correction Mode
Error Correction Mode (ECM) prevents loss of data caused by poor phone lines by
detecting errors that occur during transmission and automatically requesting
retransmission of the erroneous portion. Phone charges are unaffected, or might even
be reduced, on good phone lines. On poor phone lines, ECM increases sending time
and phone charges, but sends the data much more reliably. The default setting is On.
Turn ECM off only if it increases phone charges substantially, and you can accept
poorer quality in exchange for reduced charges.
Note If the ECM Setting is OFF,
The quality and transmission speed of faxes you send and receive are affected.
The Fax Speed is automatically set to Medium.
You will no longer be able to send or receive faxes in color.
To change the ECM setting from the device control panel
1. Press Setup.
2. Select Advanced Fax Setup and then select Error Correction Mode.
3. Press the right arrow, , to select On or Off.
4. Press OK.