HP Officejet Pro 8500 - Case I: Shared voice/fax line with answering machine

background image

Case I: Shared voice/fax line with answering machine
If you receive both voice calls and fax calls at the same phone number, and you also
have an answering machine that answers voice calls at this phone number, set up the
device as described in this section.

Figure 10-9 Back view of the device

1

Telephone wall jack

2

Use the phone cord provided to connect to the 1-LINE port on the back of
the device

Chapter 10

146

Configure and manage

background image

You might need to connect the supplied phone cord to the adapter
provided for your country/region.

3

Answering machine

4

Telephone (optional)

To set up the device with a shared voice/fax line with answering machine
1.
Remove the white plug from the port labeled 2-EXT on the back of the device.
2. Unplug your answering machine from the telephone wall jack, and connect it to the

port labeled 2-EXT on the back of the device.

NOTE: If you do not connect your answering machine directly to the device,
fax tones from a sending fax machine might be recorded on your answering
machine, and you probably will not be able to receive faxes with the device.

3. Using the phone cord supplied in the box with the device, connect one end to your

telephone wall jack, then connect the other end to the port labeled 1-LINE on the
back of the device.

NOTE: You might need to connect the supplied phone cord to the adapter
provided for your country/region.
If you do not use the supplied cord to connect from the telephone wall jack to
the device, you might not be able to fax successfully. This special phone cord
is different from the phone cords you might already have in your home or office.

4. (Optional) If your answering machine does not have a built-in phone, for

convenience you might want to connect a phone to the back of your answering
machine at the "OUT" port.

NOTE: If your answering machine does not let you connect an external
phone, you can purchase and use a parallel splitter (also known as a coupler)
to connect both the answering machine and telephone to the device. You can
use standard phone cords for these connections.

5. Turn on the Auto Answer setting.
6. Set your answering machine to answer after a low number of rings.
7. Change the Rings to Answer setting on the device to the maximum number of

rings supported by your device. (The maximum number of rings varies by country/
region.)

8. Run a fax test.
When the phone rings, your answering machine answers after the number of rings you
have set, and then plays your recorded greeting. The device monitors the call during
this time, "listening" for fax tones. If incoming fax tones are detected, the device emits
fax reception tones and receives the fax; if there are no fax tones, the device stops
monitoring the line and your answering machine can record a voice message.
If you encounter problems setting up the device with optional equipment, contact your
local service provider or vendor for further assistance.

(continued)

Set up faxing for the device

147